(+370) 61835844 info@modulis24.lt
33,64 €
IDM0012
Nauja prekė
Šiuo metu prekės neturime
Dėmesio: Paskutinė prekė atsargose!
Pasiekiama:
Description :
10A 12V/24V PWM Solar Panel Regulator Charge Controller
Features :
Overcharging protection.
Can be used for all panels.
Overdischarging protection.
Short and Open Circuit protection.
Advanced design with simple plug and play technology. No need for complicated adjustments.
Specification :
Color : Black
Size : 14 x 8.8 x 2.5cm
Rated charge current : 10A
Rated load current : 10A
Work voltage : 12/24V
Over load, short circuit protection : 1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. ≥3 Rated load current short circuit protection action.
No load current : ≤6mA
Charging circuit voltage drop : ≤0.26 V
Load circuit voltage drop : ≤0.15 V
Over voltageprotection : 17V; ×2/24V
Work temperature Industry stage :-35℃ to +55℃
Boost charge voltage : 14.6V, ×2/24V (keep 10min)
Direct charge voltage : 14.4V, ×2/24V (keep 10min)
Float charge voltage : 13.6V, ×2/24V
charge return voltage : 13.2v,×2/24V
Temperature compensation : -5mv/℃/cell (Boost charge, Direct charge, Float charge, charge return voltage)
Lower voltage indicate : 12.0V, ×2/24V
Over dischargevoltage : 11.1V(no load)- real-time modified voltage by the discharge rate, ×2/24V
Over discharge return voltage : 12.6V, ×2/24V
Control mode : PWM charge mode, modified discharge voltage by the discharge rate
How To Use :
1. Digital LED display shows the 16 lighting options (by switch with 5 seconds)
2. Number display, from 0 to 7, DC output.
3. Number display, from 0. to 7. 1Hz output.
4. Digital LED stop flash to confirm correct switch selection.
5. 10 minutes delay to make sure its real dark.
30 prekių šioje kategorijoje: